Sealers Direct Sealers Direct
Visit out Google Plus page Sealers Direct

Get our Get our product news and updates here

Order Online 24/7

Enquiries and Telephone ordering 8am - 11am on 01202 620377 or 07899 748333

DIYers Click here
Contractors add your details here

 

 

 

Phone 01202 620377

 

DIY - HOW TO

We make it easy for DIYers to seal their own driveways and patios.

All it takes is the right chemicals, equipment and a bit of time to achieve that professional finish – the result….. MONEY SAVED and DIY SATISFACTION.

The effects of sealing block paving are:

  • Enhances the colour of paving.
  • The growth of weeds and moss is inhibited.
  • Jointing sand is bonded and stabilised.
  • Future cleaning becomes easier and less time-consuming.
  • Oil and other stains can be removed with relative ease.
  • Efflorescence is reduced.
  • The surface is fade-/UV- and weather resistant.

Some typical surfaces that can be sealed with our range of specially formulated sealers are:

BLOCK PAVING, PATIO SLABS, GARAGE FLOORS, IMPRINTED CONCRETE, STENCIL CRETE, CONCRETE, SANDSTONE, SLATE, BRICK WALLS, ARCHITECTURAL CONCRETE, WAREHOUSE FLOORS, FACTORY FLOORS, INDUSTRIAL AREAS, FORECOURTS, CARPARK SURFACES, DECKING, FENCING.

 

Here are the basics for refurbing weedy & mossy block paving:

1: Pressure clean surface (do not leave any growth in the joints)
2: Treat with Paveclean or Paveclear
3: When dry, brush kiln dried sand into exposed joints
4: Apply Paving Sealer when surface is dry               

Remember: Only re-sand joints when you can seal immediately afterwards.

Driveway before
Before
Driveway After
After

 

Here are the basics for sealing new block paving:

1: Ensure surface is clean
2: Top up kiln dried sand where required
3: Give surface a good sweep
4: Do not leave any excess kiln dried sand on surface
5: Apply Paving Sealer when surface is dry

 

Here are the basics for refurbing Patios, Printed Concrete, Concrete

1: Gently pressure clean surface
2: Treat with Premium Pavewash or Paveclear
3: Apply Paving Sealer when surface is dry

 

Driveway before
Before
Driveway After
After

 

Here are the basics for refurbing Tarmac surfaces

1: Gently pressure clean surface
2: Roller apply Premium Ultra Tarmac Renovator when surface is dry

Tarmac Driveway before
Before
Tarmac Driveway After
After

 

A word on Pressure Washers:

To complete a full refurb you are going to need to use a pressure washer, small jet washers that have pencil jet nozzles are not the ones to use.

For speed and to achieve a professional finish you will need to use a machine that has either a dirt blaster nozzle, cyclone nozzle, turbo nozzle.

OR

you can hire a pressure washer and a flat surface cleaner (just like the professionals use) from most tool hire/ equipment shops.

[Back to top]

 


 

Sealers Direct Ltd

Registered Co. Number 8060924
 

DIY paving sealing | DIY Driveway sealing
Refurbing block paving| Refurbing Tarmac | Block paving sealers
How to clean block paving |

Site designed by: Site designed by Trace web design
Click here to email us