SEALERS DIRECT LTD
Block paving sealers and driveway sealers
Expert advice - Knowledge - How to seal - Buy direct
Imprinted Concrete Sealer data sheet
Premium Imprinted concrete sealer
Trade grade - use what the trade use
The latest high quality, tough acrylic co-polymer resin, suspended in our unique blend of organic solvents
Designed to protect imprinted concrete surfaces by repelling water, dirt, oil and fuels.
Inhibits algae, weed and moss growth
USE
Ready to use for sealing & rejuvenating imprinted pattern concrete surfaces
COLOUR RANGE
Clear, enhances colour, restores colour (damp look)
SURFACE FINISH
2 coat application
Silk sheen
SPREADING RATE
6 m2 per litre (approx)
More if surface has been previously sealed
DRYING TIME
Dry to walk on usually within 2hr - During normal temps Lower temps will extend drying time
Recoat when dry enough to walk on (1-2hr) no-longer tacky
Do not park vehicles on surface for 48 hrs
PREPARATION
Apply above 5°C. Do not apply to wet/ damp surfaces, if rain is imminent, damp atmosphere.
Power wash surface
Ensure surface is clean and totally dry prior to sealing
APPLICATION
Always complete a test area
By course droplet low level (solvent resistant) sealer sprayer, brush, broom or roller.
Brush out excess pooling and avoid over coating.
CLEANING
For cleaning equipment use SD Thinners. (Not White Spirit)
PRECAUTIONS
Flammable. Keep away from sources of ignition High VOC - Do not breathe vapour or spray
Do not eat, drink, or smoke when using
Ensure good ventilation during application
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Remove splashes from the skin with a recognized hand cleaner Keep out of reach of children
Do not use near fishponds Toxic to aquatic organisms
May cause long term adverse effects in the aquatic environments
The specification and coverage rates are given in good faith and are based on our experience and knowledge but without liability
As Sealers Direct has no direct control over the methods employed by the user in applying its products, any warranty either written or implied is given in good faith and can only cover the material itself
If in doubt regarding any of the above points please contact us
A Material Safety Data Sheet is available on request
admin@sealersdirect.co.uk
www.sealersdirect.co.uk
Technical information or advice call: Nigel 07899 748333
Trade grade - use what the trade use
The latest high quality, tough acrylic co-polymer resin, suspended in our unique blend of organic solvents
Designed to protect imprinted concrete surfaces by repelling water, dirt, oil and fuels.
Inhibits algae, weed and moss growth
USE
Ready to use for sealing & rejuvenating imprinted pattern concrete surfaces
COLOUR RANGE
Clear, enhances colour, restores colour (damp look)
SURFACE FINISH
2 coat application
Silk sheen
SPREADING RATE
6 m2 per litre (approx)
More if surface has been previously sealed
DRYING TIME
Dry to walk on usually within 2hr - During normal temps Lower temps will extend drying time
Recoat when dry enough to walk on (1-2hr) no-longer tacky
Do not park vehicles on surface for 48 hrs
PREPARATION
Apply above 5°C. Do not apply to wet/ damp surfaces, if rain is imminent, damp atmosphere.
Power wash surface
Ensure surface is clean and totally dry prior to sealing
APPLICATION
Always complete a test area
By course droplet low level (solvent resistant) sealer sprayer, brush, broom or roller.
Brush out excess pooling and avoid over coating.
CLEANING
For cleaning equipment use SD Thinners. (Not White Spirit)
PRECAUTIONS
Flammable. Keep away from sources of ignition High VOC - Do not breathe vapour or spray
Do not eat, drink, or smoke when using
Ensure good ventilation during application
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Remove splashes from the skin with a recognized hand cleaner Keep out of reach of children
Do not use near fishponds Toxic to aquatic organisms
May cause long term adverse effects in the aquatic environments
The specification and coverage rates are given in good faith and are based on our experience and knowledge but without liability
As Sealers Direct has no direct control over the methods employed by the user in applying its products, any warranty either written or implied is given in good faith and can only cover the material itself
If in doubt regarding any of the above points please contact us
A Material Safety Data Sheet is available on request
admin@sealersdirect.co.uk
www.sealersdirect.co.uk
Technical information or advice call: Nigel 07899 748333
© 2024. The content on this website is owned by us and our licensors. Do not copy any content (including images) without our consent.