Block paving sealers and driveway sealers
Expert advice - Knowledge - How to seal - Buy direct

Premium HD Natural stone sealer (heavy duty)

Trade grade - use what the trade use

Our top of the range, latest high quality tough acrylic co-polymer resin, suspended in our unique blend of organic solvents

Designed to protect exterior natural stone by repelling water, dirt, oil and fuels Inhibits algae, weed and moss growth

USE
Ready to use for sealing porous natural stone
(Do not seal glazed or polished stone)

COLOUR RANGE
Clear, enhances colour, restores colour (damp look)

SURFACE FINISH
1 coat application
Matt/ silk
2 coat application
Sheen

SPREADING RATE
5 m2 per litre 1st coat (approx)

More if surface has been previously sealed

DRYING TIME
Dry to walk on usually within 2hr - During normal temps Lower temps will extend drying time
Recoat when dry enough to walk on (1-2hr) no-longer tacky

PREPARATION
Apply above 5°C. Do not apply to wet/ damp surfaces, if rain is imminent, damp atmosphere.

New stone
Apply as soon as possible after installation
Ensure surface is clean (power wash), allow to dry
Seal prior to pointing (best)
If already pointed, ensure pointing fully cured

Old stone
Fully clean off surfaces with power wash, apply Premium weed and moss inhibitor. Allow to dry thoroughly.

APPLICATION (Always complete a test area)
By course droplet low level (solvent resistant) sealer sprayer, brush, broom or roller.
Brush out excess pooling and avoid over coating.

CLEANING
For cleaning equipment use SD Thinners. (Not White Spirit)

PRECAUTIONS
Flammable. Keep away from sources of ignition High VOC - Do not breathe vapour or spray
Do not eat, drink, or smoke when using

Ensure good ventilation during application
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Remove splashes from the skin with a recognized hand cleaner Keep out of reach of children
Do not use near fishponds Toxic to aquatic organisms
May cause long term adverse effects in the aquatic environments

The specification and coverage rates are given in good faith and are based on our experience and knowledge but without liability

As Sealers Direct has no direct control over the methods employed by the user in applying its products, any warranty either written or implied is given in good faith and can only cover the material itself

If in doubt regarding any of the above points please contact us
A Material Safety Data Sheet is available on request
admin@sealersdirect.co.uk
www.sealersdirect.co.uk
Technical information or advice call: Nigel 07899 748333