Black spot & algae cleaner – (very high strength concentrate)

Trade grade - use what the trade use
 
DESCRIPTION
High strength cleaner for block paving, stone, patios and concrete

USES
Immediately cleans Black Mould Dots, Green Algae, and Lichen. Kills Weeds and Moss

APPLICATION
Saturate surface by course droplet chemical sprayer. Leave to soak for approximately 10 minutes. For stubborn black mould dots repeat until desired result is achieved. When finished, thoroughly rinse down area with water.

Combine with pressure washing for best results

If you are going to seal the surface we recommend using our chemical neutraliser to reduce the risk of premature bloom/failure

COLOUR RANGE - Clear to yellow

COVERAGE RATE
Up to 30 m2 per ltr when spraying (remember to only spray the Black Mould Dots, Green Algae, Lichen, Weeds and Moss) depending on how heavy you spray

For very heavy growth apply neat by watering-can or dilute with water 1-1

(Do not use on Tarmac)

**PRECAUTIONS**

WARNING: DO NOT ALLOW CONTACT WITH ACID (CREATES GAS)

CAUTION:
Wear protective clothing, gloves, vapour mask and goggles
Do not allow contact with borders, grass & flowers you wish to survive
Do not breathe vapour or spray
Ensure good ventilation during application
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Remove splashes from the skin with water
Keep out of reach of children
Do not use near fishponds Toxic to aquatic organisms
May cause long term adverse effects in the aquatic environments

The specification and coverage rates are given in good faith and are based on our experience and knowledge but without liability

As Sealers Direct has no direct control over the methods employed by the user in applying its products, any warranty either written or implied is given in good faith and can only cover the material itself

If in doubt regarding any of the above points please contact us
A Material Safety Data Sheet is available on request
admin@sealersdirect.co.uk
www.sealersdirect.co.uk
Technical information or advice call: Nigel 07899 748333