Made in Britain logo
Trading Standards Approved logo


Paving sealer and driveway sealers serving the UK since 1980
Buy direct from the factory
01202 620 377
07899 748 333
payment options

Imprinted concrete sealer Ultra HD data sheet

Premium Ultra HD Imprinted concrete sealer (ultra heavy duty)

Our top of the range, latest high quality, tough acrylic co-polymer resin, suspended in our unique blend of organic solvents

Designed to protect imprinted concrete surfaces by repelling water, dirt, oil and fuels
Inhibits algae, weed and moss growth

Ready to use for sealing & rejuvinating imprinted pattern concrete surfaces

Clear, enhances colour, restores colour (damp look)

1 coat application

4 m2 per litre (approx)
More if surface has been previously sealed

Dry to walk on usually within 2hr - During normal temps Lower temps will extend drying time
Recoat when dry enough to walk on (1-2hr) no-longer tacky
Do not park vehicles on surface for 48 hrs

Allways complete a test area
Apply above 5°C. Do not apply to wet/ damp surfaces, if rain is imminent, damp atmosphere.

 Power wash surface
 Ensure surface is clean and totally dry prior to sealing

By course droplet low level (solvent resistant) sealer sprayer, brush, broom or roller.
Brush out excess pooling and avoid over coating.

For cleaning equipment use SD Thinners. (Not White Spirit)

Flammable. Keep away from sources of ignition High VOC - Do not breathe vapour or spray
Do not eat, drink, or smoke when using

Ensure good ventilation during application
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Remove splashes from the skin with a recognized hand cleaner Keep out of reach of children
Do not use near fishponds Toxic to aquatic organisms
May cause long term adverse effects in the aquatic environments

The specification and coverage rates are given in good faith and are based on our experience and knowledge but without liability

As Sealers Direct has no direct control over the methods employed by the user in applying its products, any warranty either written or implied is given in good faith and can only cover the material itself

If in doubt regarding any of the above points please contact us A Material Safety Data Sheet is available on request
Technical information or advice call: Nigel 07899 748333
Share by: