Nuke Pro 4 in 1 – (very high strength concentrate)
DESCRIPTION
High strength Weed, Moss, Algae killer and Black Spot Cleaner for block paving, stone, patios and concrete
APPLICATION – Black mould dot cleaner
Apply undiluted by garden chemical sprayer directly to black mould dots. For stubborn black mould dots repeat action until desired result is achieved. When finished, thoroughly rinse down area with water to dilute product away. Will stain tarmac.
APPLICATION – Weed, Moss & Algae killer (Dilute 1:4 – 1litre makes 5litres)
(More effective after pressure washing) For block paving, patios slabs, concrete & stone
Saturate surface by garden chemical sprayer or plastic watering-can. Will stain tarmac.
If you plan to seal the surface we recommend using a chemical neutraliser to reduce the risk of bloom.
COVERAGE RATE
100+ m² per 5 ltr when spraying
Depending on how heavy you spray
CLEANING - For cleaning equipment use water
**PRECAUTIONS**
WARNING: DO NOT ALLOW CONTACT WITH ACID (CREATES GAS)
Contains amongst other ingredients: Less than 5% NON-Ionic Surfactants.
Also contains: <15% Sodium Hypochlorite
CAUTION:
Wear protective clothing, gloves, vapour mask and eye protection
Do not allow contact with borders, grass & flowers you wish to survive
Do not breathe vapour or spray
Ensure good ventilation during application
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Remove splashes from the skin with water
Keep out of reach of children
Do not use near fishponds Toxic to aquatic organisms
May cause long term adverse effects in the aquatic environments
All ways complete a test area
The specification and coverage rates are given in good faith and are based on our experience and knowledge but without liability
As Sealers Direct has no direct control over the methods employed by the user in applying its products, any warranty either written or implied is given in good faith and can only cover the material itself
If in doubt regarding any of the above points please contact us
A Material Safety Data Sheet is available on request
admin@sealersdirect.co.uk
www.sealersdirect.co.uk
Technical information or advice call: Nigel 07899 748333
DESCRIPTION
High strength Weed, Moss, Algae killer and Black Spot Cleaner for block paving, stone, patios and concrete
APPLICATION – Black mould dot cleaner
Apply undiluted by garden chemical sprayer directly to black mould dots. For stubborn black mould dots repeat action until desired result is achieved. When finished, thoroughly rinse down area with water to dilute product away. Will stain tarmac.
APPLICATION – Weed, Moss & Algae killer (Dilute 1:4 – 1litre makes 5litres)
(More effective after pressure washing) For block paving, patios slabs, concrete & stone
Saturate surface by garden chemical sprayer or plastic watering-can. Will stain tarmac.
If you plan to seal the surface we recommend using a chemical neutraliser to reduce the risk of bloom.
COVERAGE RATE
100+ m² per 5 ltr when spraying
Depending on how heavy you spray
CLEANING - For cleaning equipment use water
**PRECAUTIONS**
WARNING: DO NOT ALLOW CONTACT WITH ACID (CREATES GAS)
Contains amongst other ingredients: Less than 5% NON-Ionic Surfactants.
Also contains: <15% Sodium Hypochlorite
CAUTION:
Wear protective clothing, gloves, vapour mask and eye protection
Do not allow contact with borders, grass & flowers you wish to survive
Do not breathe vapour or spray
Ensure good ventilation during application
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Remove splashes from the skin with water
Keep out of reach of children
Do not use near fishponds Toxic to aquatic organisms
May cause long term adverse effects in the aquatic environments
All ways complete a test area
The specification and coverage rates are given in good faith and are based on our experience and knowledge but without liability
As Sealers Direct has no direct control over the methods employed by the user in applying its products, any warranty either written or implied is given in good faith and can only cover the material itself
If in doubt regarding any of the above points please contact us
A Material Safety Data Sheet is available on request
admin@sealersdirect.co.uk
www.sealersdirect.co.uk
Technical information or advice call: Nigel 07899 748333
