Premium HD Patio sealer
(heavy duty)
Trade grade - use what the trade use
The latest high quality tough acrylic co-polymer resin, suspended in our unique blend of organic solvents
Designed to protect patio areas by repelling water, dirt, oil and fuels
Inhibits algae, weed and moss growth
USE
Ready to use for sealing porous cement made patio slabs
(Do not use on glazed or polished surfaces)
COLOUR RANGE
Clear, enhances colour, restores colour (damp look)
SURFACE FINISH
2 coat application
Matt/ silk
3 coat application
Sheen
SPREADING RATE
4 m2 per litre 1st coat (approx)
8 m2 per litre 2nd coat (approx)
More if surface has been previously sealed
DRYING TIME
Dry to walk on usually within 2hr - During normal temps Lower temps will extend drying time
Recoat when dry enough to walk on (1-2hr) no-longer tacky
PREPARATION (Always complete a test area)
Apply above 5°C. Do not apply to wet/ damp surfaces, if rain is imminent, damp atmosphere. If efflorescence is present (White staining on slabs from new)
New patios
Apply as soon as possible after installation
Ensure surface is clean (power wash), allow to dry
Seal prior to pointing (best)
If already pointed, ensure pointing fully cured
Old patios
Fully clean off surfaces with power wash, apply Premium weed and moss inhibitor. Allow to dry thoroughly.
APPLICATION
By course droplet low level (solvent resistant) sealer sprayer, brush, broom or roller.
Brush out excess pooling and avoid over coating.
CLEANING
For cleaning equipment use SD Thinners. (Not White Spirit)
PRECAUTIONS
Flammable. Keep away from sources of ignition High VOC - Do not breathe vapour or spray
Do not eat, drink, or smoke when using
Ensure good ventilation during application
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Remove splashes from the skin with a recognized hand cleaner Keep out of reach of children
Do not use near fishponds Toxic to aquatic organisms
May cause long term adverse effects in the aquatic environments
The specification and coverage rates are given in good faith and are based on our experience and knowledge but without liability
As Sealers Direct has no direct control over the methods employed by the user in applying its products, any warranty either written or implied is given in good faith and can only cover the material itself
If in doubt regarding any of the above points please contact us
A Material Safety Data Sheet is available on request
admin@sealersdirect.co.uk
www.sealersdirect.co.uk
Technical information or advice call: Nigel 07899 748333
Trade grade - use what the trade use
The latest high quality tough acrylic co-polymer resin, suspended in our unique blend of organic solvents
Designed to protect patio areas by repelling water, dirt, oil and fuels
Inhibits algae, weed and moss growth
USE
Ready to use for sealing porous cement made patio slabs
(Do not use on glazed or polished surfaces)
COLOUR RANGE
Clear, enhances colour, restores colour (damp look)
SURFACE FINISH
2 coat application
Matt/ silk
3 coat application
Sheen
SPREADING RATE
4 m2 per litre 1st coat (approx)
8 m2 per litre 2nd coat (approx)
More if surface has been previously sealed
DRYING TIME
Dry to walk on usually within 2hr - During normal temps Lower temps will extend drying time
Recoat when dry enough to walk on (1-2hr) no-longer tacky
PREPARATION (Always complete a test area)
Apply above 5°C. Do not apply to wet/ damp surfaces, if rain is imminent, damp atmosphere. If efflorescence is present (White staining on slabs from new)
New patios
Apply as soon as possible after installation
Ensure surface is clean (power wash), allow to dry
Seal prior to pointing (best)
If already pointed, ensure pointing fully cured
Old patios
Fully clean off surfaces with power wash, apply Premium weed and moss inhibitor. Allow to dry thoroughly.
APPLICATION
By course droplet low level (solvent resistant) sealer sprayer, brush, broom or roller.
Brush out excess pooling and avoid over coating.
CLEANING
For cleaning equipment use SD Thinners. (Not White Spirit)
PRECAUTIONS
Flammable. Keep away from sources of ignition High VOC - Do not breathe vapour or spray
Do not eat, drink, or smoke when using
Ensure good ventilation during application
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Remove splashes from the skin with a recognized hand cleaner Keep out of reach of children
Do not use near fishponds Toxic to aquatic organisms
May cause long term adverse effects in the aquatic environments
The specification and coverage rates are given in good faith and are based on our experience and knowledge but without liability
As Sealers Direct has no direct control over the methods employed by the user in applying its products, any warranty either written or implied is given in good faith and can only cover the material itself
If in doubt regarding any of the above points please contact us
A Material Safety Data Sheet is available on request
admin@sealersdirect.co.uk
www.sealersdirect.co.uk
Technical information or advice call: Nigel 07899 748333
